M35 Series Double Valve M35S46NAEXABXA
- Redundant control can achieve Category 4, PL e, when used with proper safety controls
- Each valve element in the M35 Series is equipped with a solid state pressure sensor for external monitoring
- Monitoring both of these sensors on each actuation and de-actuation of the M35 Series valve provides a diagnostic coverage up to 99%.
- Poppet design that is dirt tolerant, wear compensating for quick response and high flow capacity
- PTFE backup piston rings enhances valve endurance enabling operation with or without in-line lubrication
- Optional Soft-Start Module on energization, allows outlet pressure to increase at a slower rate until it reaches approximately 50% of inlet pressure, at which point the valve will then open fully to finish filling the system at full rate
- Modular port connection allows modular connection to Air Entry System (Lockout Valve, FRLs)
- LED Indicators provides visual display of valve status and aids troubleshooting
- Include built-in silencer module or threaded flange for remote exhaust
- SISTEMA Library available for download
Product Information
Series | M35 |
Valve Function | Redundant 3/2 Single Solenoid |
Construction | Dual Poppet |
Actuation | Electrical |
Soft Start | Included |
Lockout | Not Included |
Monitoring | External |
Feedback | PNP Solid State Pressure Sensors |
Reset | Automatic |
Voltage | 24 VDC |
Inlet Size | 1/2" |
Outlet Size | 1/2" |
Basic Size | 8 |
Ports 1-2 Flow | 4.1 Cv (4034 Nl/min) |
Ports 2-3 Flow | 7.57 Cv (7449 Nl/min) |
Feedback Rating | Contacts - 5 amps at 250 volts AC, or 5 amps at 30 volts DC |
Power Consumption | 2.0 watts |
Solenoid Connection | 5-pin M12 |
Feedback Connection | 5-pin M12 |
Operating Pressure Max | 150 psi (10 bar) |
Pilot Supply | Internal |
Height | 10.31 in (261.9 mm) |
Length | 3.15 in (80.0 mm) |
Width | 4.30 in (109.3 mm) |
Weight | 6.6 lbs (3.0 kg) |
Mounting | Inline |
Ambient Temperature Range | 40 to 120 F (4 to 50 C) |
Media Temperature Range | 40 to 175 F (4 to 80 C) |
Flow Media | Compressed air according to ISO 8573-1 Class 7:4:4 |
Valve Body Material | Cast Aluminum |
Poppet/Spool Material | Acetal and Stainless Steel |
Seal Material | Buna-N |
Safety Category | Category 4 |
PL Rating | PL e |
Safety Integrity Level | SIL 3 |
DGUV Certification | Yes |
CE Certification | Yes |
EAC Declaration | Yes |
CSA/UL Certification | Yes |
Thread Type | NPT |
Exhaust Size | 1" |
Solenoid/Sensor Pin Configuration | AB |
Pressure Gauge | Not Included |